140059 – A/TAMPER Screwdriver for R/SW. | Idem

140059 — A/TAMPER Screwdriver for R/SW. by Idem. Listed under Field Switching, Sensing & Safety on the Idem catalogue at RMS-EM.Africa.

About 140059

Guardian line series Guardian line series safety rope switches All IDEM Safety Rope Emergency Stop Switches conform to ISO13850 (EN418) and EN60947-5-5 Standards. They provide positive mechanical linkage between switch contacts and the wire rope as per EN60947-5-1. Pre-tensioning the rope using a tensioner/gripper device, clamps the rope and hooks onto the switch eyebolt. Correct tension is observed through the indicator window on the switch, once tensioned, switch contacts can be set to operational condition (safety contacts closed, auxiliary contacts open) by pressing the blue reset button on the switch cover. All Safety rope switches incorporate wire-breakage monitoring, pulling or breakage of the rope, positively opens safety contacts closing auxiliary contacts, mechanically latching the switch which can only be returned to the operational condition by pressing blue reset button as required by.

Ordering information for 140059

• Order code: 140059
• Manufacturer: Idem
• Supplied: each
• Datasheet: manufacturer datasheet for 140059

140059 — frequently asked questions

Where is the datasheet for 140059?

The manufacturer datasheet is linked under “Ordering information” above; the product page also carries the manufacturer’s documents where Idem publishes them.

Is 140059 a genuine Idem product?

Yes. 140059 is supplied through the manufacturer’s authorised channel with the standard Idem warranty, and every order is confirmed against stock before payment.