9503 4008 – 80A 4P Atys S Motor C/O SW 230VAC | Socomec

9503 4008 — 80A 4P Atys S Motor C/O SW 230VAC by Socomec. Listed under Changeover switches on the Socomec catalogue at RMS-EM.Africa.

About 9503 4008

ATyS S motorised 4 pole changeover switches ATyS S is a 4 pole remotely operated transfer switches with positive break indication. They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, or an external automatic controller, using pulse logic, or a switch. For use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer. Fully integrated cost effective solution to switch between main and an alternative power supply for loads of up to 125A: 90kVA /3 phase 415 VAC. Features: Fail-safe mechanical interlock Padlockable in the OFF position Wide-band AC control voltage 30% Manual override facility (handle supplied) Can be configured for impulse or contactor logic AC 22A IEC60947-3 (load break switch standard) AC 32B IEC 60947-6-1, GB 14048-11 (transfer switch standards) Fully independent position auxiliary contacts one for each position ( I / O / II ) Two switches mounted back to back, motorised (easily replaceable motors) Energy efficient power consumption is minimal and only required during transfer operation AC-31 B 415V (A) 80A.

9503 4008 key specifications

Key specifications: rated current 80 A; 4P; control voltage 230 V; supply 415 V; frame size ATyS S.

Ordering information for 9503 4008

• Order code: 9503 4008
• Manufacturer: Socomec
• Supplied: each
• Datasheet: manufacturer datasheet for 9503 4008

Ordering options in this range

Same product, different coil / control voltage:

• 9505 4008 — 12 V

9503 4008 — frequently asked questions

What is the rated current of 9503 4008?

9503 4008 is rated 80 A.

What coil or control voltage does 9503 4008 use?

9503 4008 is supplied with a 230 V coil. Other coil voltages in the range appear under “Ordering options” above where the catalogue lists them.

How many poles does 9503 4008 have?

9503 4008 is a 4P device.

Where is the datasheet for 9503 4008?

The manufacturer datasheet is linked under “Ordering information” above; the product page also carries the manufacturer’s documents where Socomec publishes them.

Is 9503 4008 a genuine Socomec product?

Yes. 9503 4008 is supplied through the manufacturer’s authorised channel with the standard Socomec warranty, and every order is confirmed against stock before payment.